Adjustable Bed Remote Not Working: How to Program, Reset & Fix an Adjustable Bed Remote

Adjustable beds are pretty incredible inventions that offer a range of benefits to seniors. But, that doesn’t mean they come without issues. From time to time, you may notice your adjustable bed acting up, and no issue is more frustrating than having a remote that suddenly stops working.

This guide to fixing adjustable bed remotes will set you on the right path and get you back to enjoying your adjustable bed base in no time!

Table of Contents

Have You Checked the Batteries?

We know this is something that you’ve most likely already thought of. That said, you’d be surprised how many people skip over the easiest solution – checking if the batteries in the remote are still working – and head straight to more complicated and expensive solutions.

So, before we continue, make sure you’ve checked off this obvious box! Forgetting to do this can mean you’ll wind up far more frustrated in the long run.

How to Program Adjustable Bed Remote

Programming your adjustable bed remote – or, rather, reprogramming it – should be one of the first steps you take. This is necessary when the remote and the receiver (a small electronic mechanism under your adjustable bed base, either near or inside the motor box/control box) lose their connection. It’s also referred to as syncing or going out of sync.

Re-programming does nothing more than re-establish this connection between your adjustable bed remote and receiver. But, the process for programming the remote on your adjustable bed changes depending on which model and brand you own. You should consult your owner’s manual for the exact instructions, but programming your remote usually looks like doing one of the following things:

No matter what the specific instructions are for your model of adjustable bed, programming the remote is one of the simplest and most effective ways to get it working again. If you’re unable to restore functionality to your remote by programming it, you can move on to the next step.

How to Sync the Remote for An Adjustable Bed

Sometimes, you’ll see advice or recommendations from your adjustable bed manufacturer to “sync” the remote to get it to start working again. This is just a small difference in word choice: “syncing” a remote is the same as “programming it”. That means you can follow the same steps just described if you want to sync your adjustable bed remote.

Adjustable Bed Remote Not Working – How to Fix Common Problems With Adjustable Bed Remotes

How to Reset Adjustable Bed Remote

The best way to fully reset any kind of adjustable bed remote is to perform what’s known as a “power cycle”. This action goes one level deeper than simply removing the batteries and putting them back in.

Power cycling is a way to remove all the excess electricity from any electronic device. When you unplug an appliance or remove its batteries, there is still some electricity left inside, even though it isn’t enough to make the device work. Power cycling removes that electricity, completely draining the device and rendering it 100% dead.

When that happens, whatever is causing the connection or performance problem in the device can usually be resolved. This works for all types of electronics: remotes, TVs, cell phones, even kitchen appliances!

So, how do you power cycle an adjustable bed remote? All you have to do is remove the batteries and hold the power button for at least 15 seconds. Once you’ve done that, you can put the batteries back in and see if the remote is behaving normally again. Sometimes it works, and sometimes it doesn’t – but it’s always worth a shot!

How to Reset Tempur-Pedic Adjustable Bed Remote

Tempur-Pedic makes some of the most popular and luxurious adjustable beds and sleeping systems in the country. That doesn’t mean you’ll never experience technical difficulties, however.

Most remotes are programmed using low-power radio waves, and they each have a different frequency. Sometimes, two devices in the same house may coincidentally use the same frequency (referred to as an RF channel), which causes interference and performance issues.

If the remote on your Tempur-Pedic adjustable bed starts to act up, you can reset it by following these instructions:

How to Reset Remote for Classic Brands Adjustable Bed

Classic Brands adjustable bed remotes are surprisingly easy to reset. If your remote gets disconnected or stops working, you only need to do one thing:

At the same time, press the red button on the adjustable base’s control box and one of the buttons on the remote for 5 seconds. The remote should pair with the base and get your bed back to working properly.

If this doesn’t work for you, you may need to consult your Classic Brands Adjustable Bed owner’s manual to figure out how your model needs to be reset.

How to Reset Reverie Adjustable Bed

Reverie adjustable beds are easy to reset, too – just make sure your owner’s manual is nearby.

Just follow these instructions:

How to Reset Adjustable Bed Without Remote

Do you need your bed to move back to a flat position, but you’ve lost your remote? Fortunately, if your bed is still in working condition, you have options besides disassembly!

To reset an adjustable bed without using the remote, you need to locate the power box or receiver. On some beds, the control box and receiver are located in the same place, but on others, they may be separated. Usually, though, they are in the same location on the bottom of your adjustable bed, even if they are still technically separated.

The reason you need to find the receiver/control box is that there is almost always a reset button placed in that area. Find it, then press or hold it, until your bed starts to flatten out.

I should caution you to always refer to your adjustable bed owner’s manual before trying to reset it; different models and brands have slight differences in how they need to be reset. While the reset process is generally the same, you should always check the manual before trying to reset your bed on your own.

Conclusion

Troubleshooting problems with your adjustable bed remote can be pretty frustrating. If you’re able to follow the steps above, though, it’s likely that you’ll be able to get your bed working again. If not, you may just have to settle for buying a replacement remote or cashing in on your device warranty.

Was this guide helpful for you? Which solution, for your bed remote, was the one that worked? Leave your comments below!